Surveying Instrumen
MH 180 Digital Portabel Leeb Hardness Tester
Digital Portable Leeb Hardness Tester
Test at any angle, even upside down. Wide measuring range is all metallic materials. Hardness scales HL, HRA, HRC, HRB, HB, HV, and HSD. Large capacity memory can store up to 500 groups. Connectable with PC via RS232 port. It also has a software calibration function.
Portable leeb Hardness Tester MH180,portable compact plastic case,test any angle,360 degree ,even upside down ,wide measuring range ,large screen,large memory.
1 Compact plastic case,suitable for use under poor working conditions. Test at any angle, even upside down.
2 Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
3 Large screen (segment LCD), showing all functions and parameters. With EL background light.
4 Large capacity memory could store 100 groups information.
5 Datapro Software to connect with PC via RS232 port. Micro printer support
6 Software calibration function.
Configuration:
Measuring range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB Measuring direction:360
Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS Display:dot matrix LCD,12864 dots Data memory:max. 500 groups(relative to impact times 32-1)
Working voltage:3V(2 AA size alkaline battery)
Continuous working period:about 50 hours(With backlight off)
Communication interface:RS232
Main Application Die cavity of molds Bearings and other parts Failure analysis of pressure vessel, steam generator and other equipment Heavy work piece
The installed machinery and permanently assembled parts. Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multi-measuring areas for large-scale work piece.
STANDARD DELIVERIES:
No Items Quantity
1 Main unit 1
2 D type imapact device 1
3 Test block with HLD value 1
4 Cleaning brush 1
5 Instruction manual 1
6 Warranty card 1
7 Carrying case 1
8 Batteriry 1
Test at any angle, even upside down. Wide measuring range is all metallic materials. Hardness scales HL, HRA, HRC, HRB, HB, HV, and HSD. Large capacity memory can store up to 500 groups. Connectable with PC via RS232 port. It also has a software calibration function.
Portable leeb Hardness Tester MH180,portable compact plastic case,test any angle,360 degree ,even upside down ,wide measuring range ,large screen,large memory.
1 Compact plastic case,suitable for use under poor working conditions. Test at any angle, even upside down.
2 Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
3 Large screen (segment LCD), showing all functions and parameters. With EL background light.
4 Large capacity memory could store 100 groups information.
5 Datapro Software to connect with PC via RS232 port. Micro printer support
6 Software calibration function.
Configuration:
Measuring range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB Measuring direction:360
Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS Display:dot matrix LCD,12864 dots Data memory:max. 500 groups(relative to impact times 32-1)
Working voltage:3V(2 AA size alkaline battery)
Continuous working period:about 50 hours(With backlight off)
Communication interface:RS232
Main Application Die cavity of molds Bearings and other parts Failure analysis of pressure vessel, steam generator and other equipment Heavy work piece
The installed machinery and permanently assembled parts. Testing surface of a small hollow space Material identification in the warehouse of metallic materials Rapid testing in large range and multi-measuring areas for large-scale work piece.
STANDARD DELIVERIES:
No Items Quantity
1 Main unit 1
2 D type imapact device 1
3 Test block with HLD value 1
4 Cleaning brush 1
5 Instruction manual 1
6 Warranty card 1
7 Carrying case 1
8 Batteriry 1
VIBRATION METER DOBAMONI DV 465A
Measured values and makers
(units, 10,and battery symbol)
Transducer :
Piezoelectric accelerometer
Parameters measured:
Velocity, Acceleration, and Displacement RPM and Frequency
Measuring range :
Velocity:
0.01-400mm/s2 true RMS
0.000-16.00 inch/s2
Acceleration:
0.1-400.0m/s equivalent peak
0.3-1312 ft/s
Displacement : 0.001-4.000mm
0.04-160.0 mil , equivalent pk-pk
RPM (r/min) : 60-99,990 r/min
Readings should be multiplied by 10 if the display show '10'.
Frequency: 1-20 kHz
Frequency range for measuring
Acceleration :
10Hz. to 1kHz. In '1' mode
10Hz. to 10kHz. In '10' mode for bearing condition check
Velocity : 10Hz. to 1kHz.
Displacement : 10Hz. to 1kHz.
Accuracy: 5%+2 digits
Metric/ Imperial conversion
PC interface: RS232C
Output: AC output 2.0V peak full scale (load resistance: above 10k)
Power supply: 4x1.5 AAA size (UM-4) batteries
Power off : 2 modes
Manual off at any time
Operating conditions:
Temperature : 0-50 C
Humidity : below 90% RH
VIBRATION METER AMITTARI AV-160B
Piezoelectric accelerometer
Accuracy
5%+2 digits
Measurement Range Displacement : 0.001-4.000 mm equivalent peak-peak / 0.04-160.0 mil
Velocity : 0.1-400.0 mm/s true RMS / 0.004-16.00 inch/s
Acceleration : 0.1-400.0 m/s' equivalent peak / 0.3-1312 ft/s' / 0.0-40g
Frequency Range
Displacement : 10Hz. ~ 1kHz.
Velocity :10Hz. ~1kHz.
Acceleration: 10Hz. ~ 10kHz.
Operating Conditions Temperature : 0-50 '"
Humidity : below 95% RH
Analogue Output
AC output 0~2.0V peak full scale (load resistance: above 10k)
Power Supply
4x1.5vAAA (UM-4) Battery
Size
140x70x30mm
Weight
130g (Not including Batteries)
Komentar
Posting Komentar